Sample Problem Statement

Calculate log mean temperature difference for the following shell and tube heat exchanger for two possible arrangements (i)...

# Category - Engineering Calculations

Question - How do you calculate LMTD with the formula does not work?

Calculate log mean temperature difference for the following shell and tube heat exchanger...

NPSHr (required) is normally specified by the pump manufacturer. Hence NPSH calculation usually refers to the calculation of available NPSH (NPSHa).

Available...

Sample Problem Statement

A level control valve is to be installed on an 8” oil line going from an oil water separator to an oil heater. The oil water...

Sample Problem Statement

Design a vertical gas-liquid separator for separation of fuel gas bubbles entrained in water flow.

Flow rate of water = 182...

Tutorial for equivalent length calculation

This tutorial uses sample calculations to demonstrate how to calculate equivalent length for piping fittings, joints...

Problem statement: pump sizing calculation

Estimate the pump differential pressure, shaft power and motor power requirement to pump 200,000 kg/hr of water. The...

Sample Problem Statement -

Calculate the size of line to handle 100,000 kg/hr of water. Approximate length of this line is around 200m. This water stream is...