Schoepentoeters are inlet devices are used in phase separator vessels as well as stripper, absorber, distillation columns etc. mainly for even distribution of...
Category - Process Equipment
Before the use of cooling towers, rivers, lakes, or other cooling water supplies were required in order to meet cooling needs of power plants.
Cooling towers...
Figure 1 - Typical centrifugal compressor P&ID
Proper centrifugal compressor symbol should be selected first, as shown in figure-1. Normally, a...
Electrostatic precipitators (ESPs) are industrial emissions control units that are typically installed at coal power plants. Their purpose is to collect and...
Today, it is widely accepted that corrosion of steel surfaces increases with increasing humidity level. Desiccant dehumidifiers are used in industrial plants...
Similar to other pumps, a Liquid Ring Vacuum Pump (LRVP) has a bladed impeller attached to a center hub.
Typical centrifugal pumps increase the operating...
As the name implies, different types of steam traps are installed in the steam carrying pipes to trap and remove steam condensate.
The basic role of steam...
Centrifugal pumps are among the important equipment in any process plant. In any refinery they are considered to be equivalent to heart of a refinery, as they...
An absorption chiller is a machine that produces chilled water by using the residual heat from sources such as steam, hot water or hot gas. Chilled water is...
The following figure-1 represents a typical process flow diagram (PFD) for a centrifugal compressor system. Common equipments included in such systems are...
A refrigerant is a compound used in the refrigeration process that goes under a phase change from a gas to liquid and then back. Refrigerants can be found in...